New Software Adds Value and Flexibility to Dual Channel Flame Photometers

Sherwood Scientific’s Model 420 and Model 425 Flame Photometers now come with 420 BlueNotes software. This eagerly anticipated product launch not only enables the instruments to perform sample analyses outside the linear response range but also facilitates measurement of all elements simultaneously. Supplied free with all newly-built Model 420 and 425 instruments, the 420 BlueNotes package greatly increases the utility of these dual channel flame photometers. The linear response range of the standalone instrument is extended to multipoint calibration with 420 BlueNotes, enabling analysis of a much wider range of sample concentrations. Another major change is that all elements – Na, K, Li for Model 420 and Na, K, Li, Ca for Model 425 – can be measured at the same time, rather than only two at once. If required, the operator will be able to measure all elements simultaneously via the host computer’s on-screen, real-time display.

Jon Copsey, Sherwood Scientific’s Marketing Manager, commented: ‘420 BlueNotes is an exciting development which adds significant value to our dual channel flame photometers. We have also updated the firmware of both the 420 and 425 for enhanced performance, adding a Clinical 102 Mode which measures Na, K and Li but is designed for the expected higher concentrations of Potassium in urine. The 420 BlueNotes disk includes a demonstration of how the software works with the instrument, helping users gain maximum benefit from the new functionalities.”

420 BlueNotes allows the operator to choose K or Li as an internal standard reference element. The ‘Spot Check’ facility updates a previous multipoint calibration, thus adjusting for any drift (when the internal standard facility is not in use) and allowing previously generated calibrations to be re-used. 420 BlueNotes requires a PC running Windows XP or later (not supplied), and is fully compatible with combinations of newly-supplied dual channel flame photometer, diluter and autosampler. However, the new software is not backward compatible with units already installed.