New SANYO Orbital Shaker for use Inside a CO2 Incubator

This Orbital Shaker is designed as an incubator shaker for use in humidified incubators and Plant growth Chambers: The new MIRS100C is humidity protected. The shaker’s controller is independent of the shaker section with an interface using waterproof connections.

MIR-S100C has two main key components. A shaker unit which can be placed on a mounting stand inside the incubator, and a separate controller on top of the incubator. In this way it is possible to control and review without opening the incubators door.

The Incubator Shaker can be set to speeds between 40 and 200 rpm. The Speed error Alarm indicates an error when the number of revolutions does not reach or exceeds the preset value. The Shaker gradually accelerates until reaching the preset number of revolutions so that samples inside flasks and test tubes are not spilled, foamed or agitated excessively as to cause cell damage. Three levels of acceleration speed can be selected. If the timer function is selected, the controller indicates the time of operation from 0 to 99.9 hours in increments of 0.1 hour (6 minutes).

The MIR-S100C automatically recovers after a power interruption and indicates that a power interruption has occurred. It also detects overcurrent and automatically stops operation. Errors are indicated when overload is applied to the motor.

InCu saFe® antimicrobial copper alloy stainless steel is used for the shaker platform. Also, the shaker section is equipped with a small window that can be used for spraying decontaminating disinfectant inside.

The MIR-S100C Orbital Shaker can be used with SANYO Incubators MCO-17 / 18 / 19 and 20 series CO2 Incubators and MLR Plant Growth Cabinets. It is also possible to use this shaker in other manufacturers incubators if they are large enough and have an access hole.