This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Anguil is built on strong client relationships. We are honored that so many of our clients contact us again when it is time to look at a new air or water pollution control system. To assist customers with shorter lead time or reduced capital cost, Anguil can provide used pollution abatement equipment to satisfy a customer’s need.
All Anguil used equipment undergoes a thorough inspection, refurbishment, rigorous quality assurance test, and component upgrades. This refurbished equipment listed below provides an affordable pollution control solution backed by a full warranty.
Anguil Refurbished Equipment Advantages:
- Full factory warranty
- Discounted prices
- Completely rebuilt systems with updated controls
- 75 point inspection and calibration
As with all our products and services, you can expect the highest quality workmanship and engineering with Anguil’s guarantee of excellence.
Available Technologies
ID# 14625 – 40,000 SCFM Regenerative Thermal Oxidizer (RTO)
Very well maintained RTO that includes supplemental fuel injection (SFI) for reduced energy consumption and a hot gas bypass for highly concentrated emission streams. The ceramic media is structured and rated for 95% thermal efficiency. The RTO is capable of 98%+ Destruction Rate Efficiency and utilizes dual burners for uniform heating and high VOC removal efficiency. The system is immediately available for rent or purchase and comes with a brand new, back-up system fan.
ID# 11482 – 10,000 SCFM Regenerative Thermal Oxidizer (RTO)
This forced draft RTO is capable of 98%+ destruction rate efficiency. It includes supplemental fuel injection for reduced energy consumption and lower greenhouse gas output. The structured ceramic media is rated at 97% thermal efficiency to allow for self-sustaining operation at low concentration levels, and to further reduce greenhouse gas output. Manufactured in 2004 this unit is skid mounted for easy installation and compact footprint. Immediately available for rent or purchase.
ID# 30062 – 15,000 SCFM Regenerative Thermal Oxidizer (RTO)
Initially utilized for a food processing application, this RTO was manufactured in 2020 and is no longer needed at the facility. It is manufactured in an induced draft configuration so air is pulled through the unit. This eliminates any potential for fugitive emissions to atmosphere or inside the facility for an indoor installation. The controls package is NEMA 3R rated with heated and air conditioned panel mounted to the oxidizer and includes a variable frequency drive. The structured ceramic media is rated for 95% thermal efficiency and the RTO is capable of 98%+ Destruction Rate Efficiency.
ID# 18193 – 7,500 SCFM Regenerative Thermal Oxidizer (RTO)
Originally installed in 2014 on a light industrial application, this RTO is designed for 98+% destruction capability. It comes with a temperature controlled NEMA 4 control panel mounted on the skid, designed for UL-507A conformity with Allen Bradley CompactLogix PLC and HMI. The RTO has brand new ceramic media designed for 95%+ thermal efficiency and a hot gas bypass for highly concentrated emission streams. Dual forced-draft fans with isolation dampers are included.
ID# 11381 – 1,500 SCFM Thermal Recup
This 1,500 SCFM Thermal Recuperative Oxidizer is designed for chlorinated applications and capable of 99% DRE. Originally manufactured in 2003, this compact oxidizer has a lot of life left for the next owner. Upgrades within the past 3 years include an exhaust stack replacement, new fresh air damper, and new alloy heat exchanger.
ID# 10615 – Refurbished 250 SCFM Electric Catalytic Oxidizer
For Sale or Rent! 90% DRE. Second HLC controller to catalyst inlet added to meet current NFPA regulations. New air proving switch, thermocouples, actuators, and controllers. Replacement of several buttons, switches and lamps. PLC battery.
ID# 16529 – 65,000 SCFM Regenerative Thermal Oxidizer
Brand new Anguil RTO – never run, never commissioned! Originally installed in 2013, unit features carbon steel fuel train, energy recovery, and combustion chambers, IEEE 841 compliant motors, NEMA 12 control panel, SFI, oxygen analyzer, and hot gas bypass.
ID# 16355 – 500 SCFM Direct Fired Thermal Oxidizer
Originally built: 2012 Size: 500 SCFM, up to 60 lbs/r (1 lbs/min) of VOCs, inert gas stream VOC Destruction Efficiency: 99% Availability: Immediately for rental or purchase Features: dual fuel burner with dual blocking valves, Kinedizer low NOx burner, NEMA 4 control panel with awning, and Allen Bradley PLC and HMI.
ID# 2357 – 1,500 SCFM Catalytic Oxidizer
This skid-mounted catalytic oxidizer is designed to handle up to 1,500 SCFM of standard emissions as well as chlorinated compounds. Rebuilt in 2017 with updated controls and new catalyst in 2021, this system has always been operated indoors so the exterior also remains in great condition. Immediately available for rental or purchase.
ID# 11434 – 7,500 SCFM Regenerative Thermal Oxidizer
This Anguil RTO was first installed in 2004 but remains in relatively good condition and is capable of 98% destruction efficiency with 95% thermal recovery. The RTO was originally designed with saddle media for 7,500 SCFM of capacity but it could be upgraded with structured media to handle upwards of 10,000 SCFM. Immediately available for rental or purchase.
ID# 16512 – 2,000 SCFM Catalytic Oxidizer
This Anguil Catox was built in 2012 and designed for treating off gases from a soil remediation site. The system comes with much of the supplemental equipment needed for remediation applications, including blowers, condensation tank, flammable storage cage, air compressor, storage tank, piping, bridge stands, and more. The entire system has been disassembled and palatalized for shipment so it is immediately available for purchase or rental. Can be sold as a complete system or individual components.
ID# 16579 – 15,000 SCFM Catalytic Oxidizer
Designed as a Selective Catalytic Reduction (SCR) system for NOx, this unit could be applied on VOCs or HAPs as well. It includes 304 stainless steel components and stack, variable frequency drive, PLC based controls with burner management system and tube style heat exchanger. Immediately available for purchase.
500 SCFM Ceramic Filter/Catalyst
A small oxidizer to test the operation of a specific process exhaust and determine the applicability of catalytic oxidation.