Minimize Maintenance Time with Finger-Tight GC Fittings
- Speed up column installation with Hot Swap column nuts.
- No waiting for the injector to cool.
- No cumbersome wrenches.
- And no burned fingers!
- Improve data consistency—finger-tight gauges help you set insertion distances quickly and accurately.
Reduce Instrument Downtime with Finger-Tight GC Fittings
Spending too much time on column installation and maintenance? Finger-tight GC fittings are faster and easier to install than traditional fittings, and they give you leak-tight connections with much less effort. Switch today to increase sample throughput and improve lab productivity.
Finger-tight GC fittings simply twist into place—no more time-consuming, cumbersome wrench work!
Keep Cool with Hot Swap Technology
The heat-dissipating design of Hot Swap finger-tight column nuts lets you save time by changing the column while the injector is still hot. With Hot Swap column nuts, you can finish maintenance faster without burning your fingers or waiting for the instrument to cool down.
Quick-cooling Hot Swap column nuts mean no burnt fingers and no downtime for cooling.
Ensure Better Data Quality with Finger-Tight GaugesConsistent column insertion distance is the key to stable chromatographic performance and reliable results. Reduce user variation, poor peak shape, and low response by using finger-tight capillary gauges to quickly seat ferrules in exactly the right place for every installation. |
|
Switch to Finger-Tight Fittings to Speed Up and Simplify Maintenance for All Your GCs!
Agilent GCs (except Intuvo)
For Agilent GCs, use 1/16” graphite or 60:40 Vespel:graphite ferrules to ensure a proper seal.
| Hot Swap Capillary Column Nuts | Standard 1/16" Ferrules (cat.# 22347) |
| Compact Ferrules (cat.# 22348) | |
| 0.8 mm Replacement Inlet Seals | Gold-Plated (cat.# 21317) |
| Siltek Treated (cat.# 21319) | |
| Stainless Steel (cat.# 21315) | |
| 0.8 mm Dual Vespel Ring Inlet Seals | Gold-Plated (cat.# 21240) |
| Siltek Treated (cat.# 21242) | |
| Stainless Steel (cat.# 21238) | |
| Reducing nut | cat.# 22078 |
| Installation Gauge | cat.# 27228 |
| Ceramic wafer | cat.# 20116 |
| For Use with Flip Seal Dual Vespel Ring Inlet Seals | |
| Hot Swap Capillary Column Nuts | For 1/16" Fitting (cat.# 27224) |
| 1.2 mm Flip Seal Dual Vespel Ring Inlet Seals | Gold-Plated (cat.# 23411) |
| Siltek-Treated (cat.# 23412) | |
| Flip Seal Dual Vespel Ring Inlet Seal Kit (Includes Reducing Nut) | cat.# 23406 |
| Installation Gauge | cat.# 27227 |
PerkinElmer 590/690 GCs and GC2400 GCs
For PerkinElmer GCs, use 1/16” graphite or 60:40 Vespel:graphite ferrules to ensure a proper seal.
| Hot Swap Capillary Column Nuts | Standard 1/16" Ferrules (cat.# 22347) |
| Compact Ferrules (cat.# 22348) | |
| 0.8 mm Replacement Inlet Seals | Gold-Plated (cat.# 21317) |
| Siltek Treated (cat.# 21319) | |
| Stainless Steel (cat.# 21315) | |
| 0.8 mm Dual Vespel Ring Inlet Seals | Gold-Plated (cat.# 21240) |
| Siltek Treated (cat.# 21242) | |
| Stainless Steel (cat.# 21238) | |
| Reducing Nut To use Hot Swap capillary column nuts with PerkinElmer GCs, you must first replace the original reducing nut with this compatible reducing nut. |
cat.# 22078 |
| Installation Gauge | cat.# 27228 |
| Ceramic Wafer | cat.# 20116 |
| For Use with Flip Seal Dual Vespel Ring Inlet Seals | |
| Hot Swap Capillary Column Nuts | For 1/16” Fittings (cat.# 27224) |
| 1.2 mm Flip Seal Dual Vespel Ring Inlet Seals | Gold-Plated (cat.# 23411) |
| Siltek Treated (cat.# 23412) | |
| Flip Seal Dual Vespel Ring Inlet Seal Kit (Includes Reducing Nut) | cat.# 23406 |
| Installation Gauge | cat.# 27227 |
Shimadzu 2010, 2010 Plus and 2030 (and 17A and 2014) GCs
Standard Inlet (SPL Injector)
| Hot Swap Capillary Column Nuts | cat.# 27230 |
| Installation Gauge | cat.# 27229 |
| Ferrules | 0.4 mm ID for <0.25 mm columns (cat.# 24827) |
| 0.5 mm ID for 0.32 mm columns (cat.# 24828) | |
| 0.8 mm ID for 0.53 mm columns (cat.# 24829) | |
| For Conversion to Standard 1/16” Ferrules | |
| Conversion Kit | cat.# 27220 |
| Installation Gauge | cat.# 27227 |
| Ceramic Wafer | cat.# 20116 |
Thermo 1300/1310 and 1600/1610 GCs
For Thermo GCs, use 1/16” graphite or 60:40 Vespel:graphite ferrules to ensure a proper seal.
| Hot Swap Capillary Column Nuts | Standard 1/16" Ferrules (cat.# 22347) |
| Compact Ferrules (cat.# 22348) | |
| 0.8 mm Replacement Inlet Seals | Gold-Plated (cat.# 21317) |
| Siltek Treated (cat.# 21319) | |
| Stainless Steel (cat.# 21315) | |
| 0.8 mm Dual Vespel Ring Inlet Seals | Gold-Plated (cat.# 21240) |
| Siltek Treated (cat.# 21242) | |
| Stainless Steel (cat.# 21238) | |
| Reducing Nut | cat.# 22078 |
| Installation Gauge | cat.# 27228 |
| Ceramic Wafer | cat.# 20116 |
| For Use with Flip Seal Dual Vespel Ring Inlet Seals | |
| Hot Swap Capillary Column Nuts | cat.# 27224 |
| 1.2 mm Flip Seal Dual Vespel Ring Inlet Seals | Gold-Plated (cat.# 23411) |
| Siltek Treated (cat.# 23412) | |
| Flip Seal Dual Vespel Ring Inlet Seal Kit (Includes Reducing Nut) | cat.# 23406 |
| Installation Gauge | cat.# 27227 |
Thermo TRACE and Focus GCs
For Thermo TRACE and Focus GCs, use 1/16” graphite or 60:40 Vespel:graphite ferrules to ensure a proper seal.
| Capillary S/SL Injector Adaptor | cat.# 24917 |
| Hot Swap Capillary Column Nut | cat.# 27224 |
| Installation Gauge | cat.# 27227 |
| Ceramic Wafer | cat.# 20116 |