HEMCO Corporation

  ISO 9001:2015 UL 1805  

SE UL Hoods

 

 
Perchloric Acid Fume Hoods
UniFlow Perchloric Acid fume hoods feature a type 316 stainless steel one piece fume chamber with integral worksurface and are engineered for the safe handling of perchloric acids in laboratory procedures. Perchloric Acid hoods are offered in sizes 48”, 60”, & 72” widths and include a dedicated wash down and exhaust system. It is recommended to thoroughly wash down fume chamber and exhaust system after each use. Note: Perchloric Acid Hoods are for perchloric acid use only.
UniFlow Perchloric Acid Fume Hoods
UniFlow Superstructure constructed of either PVC or 316 stainless steel features exclusive unitized dual wall construction for superior chemical resistance, strength, and durability. Rear drain trough is integral to superstructure. Dedicated wash down with integral piping spray nozzles & remote control on right column. 1 piece interior fume chamber type 316 stainless steel fume or PVC fume chamber and baffle. Meets NFPA-45 classification with flame spread of less than 25 per ASTM E-84.
PVC or Stainless Steel Work Surfaces integral PVC or 316 stainless steel worksurface.
Access Panel removable to access ducting connections, plumbing & electrical services from a single point electrical box, 115/230V, 50/60Hz AC operation. Energy efficient explosion proof light fixture with light switch on left column,
all factory installed.
28” Vertical Sash Height provides ease of access for apparatus set-up in fume chamber. 24" or 30" interior reach in depth, and 44" interior working height. Sash is perfectly counter balanced, 3/16 tempered safety glass, coated stainless steel cable with stainless steel pulley assembly. Framed in nonmetallic PVC framing, track, and aerodynamic sash lift for ease of movement and air flow efficiency.
Air Flow Monitor (Optional equipment) continuously monitors face velocity air flow, meets ANSI and OSHA requirements. Cat. No. 51403
Sash Stop located at 1/2 open position to reduce air flow 50%, Optional equipment Cat. No. 51652 (stainless steel)
Cat. No. 51653 (PVC)
UniFlow Perchloric Acid Fume Hoods
Click for Maintenance Manual

UniFlow Perchloric Acid Hood Cat. No. 12501
shown with optional base cabinets and fixtures,

Accessories

Perchloric Acid Fume Hoods

UniFlow Perchloric Acid Fume Hoods Specifications
UNIFLOW PERCHLORIC ACID DESCRIPTIONS Hood Depth B .Fume Hood Width "A"
48" 60" 72"
1. Uniflow 316 Stainless Steel Perchloric Acid Laboratory Fume Hoods:Seamless type 316 stainless steel fume chamber with integral worksurface and drainage trough with baffle and exhaust collar. Hood has built-in wash down system with spray nozzles and piping to front mounted control valve. Picture frame sash opening with counterbalanced clear tempered safety glass sash with chemical resistant PVC framing, track, and aerodynamic sash lift. Explosion-proof light fixture Cat. No. 50034, installed but not wired, 115/230V, 50/60Hz AC, Class I Div II Groups A B C D, Class II Div II Groups F&G, all electrical components UL listed. 30"

12401

12501

12601

36" 12411 12511 12611
2. Uniflow PVC Perchloric Acid Laboratory Fume Hoods:Seamless PVC fume chamber with integral worksurface and drainage trough, with baffle and exhaust collar. Hood has
built-in wash down system with spray nozzles and piping to front mounted control valve.
Picture frame sash opening with counterbalanced clear tempered safety glass sash with
chemical resistant PVC framing, track, and aerodynamic sash lift. Explosion-proof light
fixture Cat. No. 50034, installed but not wired,115/230V, 50/60Hz AC, Class I Div II Groups A B C D, Class II Div II Groups F&G, all electrical components UL listed.
30" 12421 12521 12621
36" 12431 12531 12631
UNIFLOW PERCHLORIC ACID EXHAUST BLOWERS        
3. Blowers Blowers are constructed of fluoropolymer coated steel, belt driven, includes explosion proof motor, non-sparking wheel, spray wash nozzle and drain in the blower housing. The specifications to the right
are based on 120 FPM face velocity.
(For 48” hoods) 475 cfm @ 1/2 open
(For 48” hoods) 950 cfm @ full open
  52395 51395    
(For 60” hoods) 625 cfm @ 1/2 open
(For 60” hoods)1250 cfm @ full open
    52396
51396
 
(For 72” hoods) 765 cfm @ 1/2 open
(For 72” hoods) 1525 cfm @ full open
      52397
51397
4. Optional stainless steel stack outlet with wash down nozzles:   51398 51398 51399
 

Perchloric Acid Fume Hoods

Perchloric Family Drawing
Click for Sales, Service, & Request for Quote   Click for Maintenance Manual
HEMCO Corporation 711 S. Powell Road Independence, MO 64056 816-796-2900
  Copyright © 2024 HEMCO Corporation All Rights Reserved