Analytical Instrumentation
IP-585 – Determination of fatty acid methyl esters (FAME) from bio-diesel in aviation turbine fuel
Jul 07 2017
Author:
Jack Hubball
on behalf of PAC LP
Biodiesel is the most commonly used alternative fuel. Despite its suitability as an alternative fuel, it possesses physical and chemical parameters that disqualify it for use in aviation fuels. Biodiesel is made via conversion of vegetable and animal fats into fatty acid methyl esters (FAMEs).
This fundamental difference between biodiesel and hydrocarbon-based petroleum diesel imparts properties to the biodiesel such as a high freezing point (- 5 °C) and poor oxidative stability that render it unsafe in jet fuel – for example, at low temperatures, biodiesel forms wax crystals that can clog fuel lines and filters.
To analyse jet fuel for biodiesel contamination, the Energy Institute has developed a GC/MS selective ion monitoring/scan detection method designated as IP-585(1). Per this method, the allowable limit for a cross-contamination level of biodiesel FAME in commercial jet fuel A-1 is 50 ppm.
Jet fuel is a complex mixture of hydrocarbons with a broad boiling point range. Subsequently, it is not always possible to separate the polar FAME compounds from the hydrocarbon matrix. A remedy for this problem is to separate the samples on a polar phase capillary column using single ion monitoring detection.
The method lists a lengthy, 50-60 meters, polyethylene glycol (carbowax) type capillary column for the analyses. This type of column phase is considered “polar” and interactions with the FAMEs results in longer column retention times than the non-polar hydrocarbon components of the jet fuel.
A common practice in many environmental analyses is to use a confirmation GC column to corroborate and validate the separation/analysis. In this case, another type of polar phase capillary column utilising a cyanopropyl/phenyl silicone stationary phase was used to confirm the separation of the FAME mix. This silicone phase is less susceptible to moisture and has better thermal stability than the carbowax phase.
AccuStandard offers the IP-585 seven component FAME mixture as well as the individual components and internal standard.
For more detailed information please visit our website at www.accustandard.com.
Reference:
(1) IP585/10 Determination of fatty acid methyl esters (FAME) derived from bio-diesel fuel, in aviation turbine fuel - GC/MS with selective ion monitoring/scan detection method Energy Institute, London, U.K.
Digital Edition
PIN 25.1 Feb/March
March 2024
In This Edition Safety - The technology behind the ION Science Tiger XT - Safety with ammonia and LOHCs as hydrogen carriers Analytical Instrumentation - Discussion on new tribology te...
View all digital editions
Events
Apr 24 2024 Mumbai, India
Apr 24 2024 Jakarta, Indonesia
Apr 28 2024 Montreal, Quebec, Canada
Apr 30 2024 Birmingham, UK
May 03 2024 Seoul, South Korea