occupational exposure to toxic chemicals

Occupational Exposure To Toxic Chemicals

1 worker dies every 30 seconds due to the exposure of toxic gases in the workplace
Download Guide

Back to Industry Guides

A personal unit is assigned to each worker. Continuous monitoring of the worker’s breathing zone may alert the wearer when the environment becomes unsafe.

The ION Science Cub personal Volatile Organic Compounds (VOC) gas detector is worn within the breathing zone to detect exposure to toxic gases and keeping workers safe within their working environment.

Monitoring employee exposure to toxic gases

Occupational Hygienists undertake surveys and evaluate risks to health in the workplace by accurately measuring levels of exposure. Often these are measured through precise specialist equipment that record data, for example the ION Science Cub.

Occupational Hygienists will be concerned with controlling health risks in
practical and cost-effective ways by assessing and resolving practical problems.
This will involve looking at the short and long-term health effects, caused by both acute and chronic exposure to hazards and toxic gases. This helps an organisation to respond effectively to legislative requirements.

workplace safety objectives

As with all PID detectors, a key challenge is over/under reading in the presence of humidity. The ION Science MiniPID practically eliminates the effects of humidity by employing the Patented Fence Electrode Technology and Anti Contamination Technology.

Gary SmithBusiness Unit Manager (Portables)

Personal Protective Equipment (PPE)

It is preferable to remove the risks totally, or change ways of working but if this is not practicable achievable personal protective equipment is often used as part of control measures. This also needs checking and maintenance because, if it fails, it no longer provides protection and exposes the wearer to danger.

Portable gas detectors are classed as a type of Personal Protective Equipment (PPE), designed to keep personnel safe from gas hazards and allow mobile testing of locations before they are entered. These small devices are essential in many areas where gas hazards could occur, because they are the only means of monitoring an operator’s breathing zone continuously, whilst stationary or moving.

Monitoring Personal Exposure

Monitoring typically means ‘air sampling’ but it may also involve taking biological samples, e.g. breath or urine. Monitoring normally makes reference to ‘Workplace Exposure Limits’ (WELs) and these limits should not be exceeded. Effective monitoring of VOCs can achieved by coupling an accurate discrete detector, like the ION Cubs with a data logger. The data logging capability is constantly measuring ones exposure to toxic gases. This can then be viewed, understood and reported.

Download Guide

Download Our FREE Guide

“Occupational Exposure To Toxic Chemicals”

The Occupational Exposure To Toxic chemicals guide which can be downloaded below provides details of exposure to airborne contaminants, the standard procedure is the assessment of inhalation exposure. This includes the determination of the air concentration that workers are exposed to, or in the case of airborne particles, the air concentration of the relevant fraction, e.g., the “respirable fraction” and the duration of the exposure. If routes other than inhalation contribute appreciably to an individual uptake of a chemical, an incorrect judgement may be made by looking only at the inhalation exposure. In such cases, total exposure has to be assessed, and a very useful tool for this is a personal, body worn Photoionisation Detector (PID).

occupational exposure to toxic chemicals guide

Download Guide

Personal Gas Detection Equipment for Worker Safety

Download your FREE Guide

Simply complete the form below to obtain your FREE Guide on ‘Occupational Exposure To Toxic Chemicals”.

Related Guides

Aromatic Gases – What Are They?

Aromatic gases contain at least one aromatic ring of which benzene is the simplest form. Benzene itself forms the well know group of compounds (BTEX).

View Details

Benzene Detection – Fixed Instruments

Benzene Detection (Fixed Instruments) - ION Science's Fixed Photoionisation Detectors protect workers and the public from benzene exposure

View Details

Fenceline Monitoring

Hazardous air pollutants are those known to cause cancer and other serious health impacts. This is why fenceline monitoring is important!

View Details

Fugitive Emissions Monitoring

Gas leak equipment reduces the likelihood of leaks and the best way to reduce fugitive emissions is through regular leak testing and maintenance.

View Details

Gas Detection Equipment – Choosing The Right Type

Gas detection for safety is pivotal, so Ion science cuts no corners when it comes to our gas detectors. Explore our variety of gas detectors today!

View Details

Gas Detection Instrument – Do you Require One In Your Industry?

The Gas detection Instrument guide will help you understand the requirement for each type of instrument and which will be best suited to your industry.

View Details

Gas Detection System – PID Or FID?

Gas Detection System, the main differences and benefits of using photoionisation detection and flame detection when monitoring fugitive emissions.

View Details

Monitoring Aromatic Gases

Monitoring aromatic gases early is crucial to limit the effects on worker’s health. This all depends upon how much they are exposed to and for how long.

View Details

Risks Associated With Unproven Technology

The following guide provides the reader with knowledge on what to look out for when purchasing a fixed gas detection instrument. Covering key aspects such as performance specification, sensitivity and measurement range, temperature, contamination and humidity tolerance, flexibility and certification.

View Details

Urban Air Quality

It's estimated that poor urban air quality accounts for 7million deaths per year. Unless poor air quality can be improved, death rates will continue to rise.

View Details